Hall Effect Precision Position Sensor

Available Options

  • Lead wires, lead lengths and terminations available.
  • HR370 High TG Printed Circuit Board available.
  • JST and Molex terminals/connectors available.
  • Special linearities, such as electrical function and various angles.
  • Special shaft configurations (screwdriver, slotted, thru-hole and custom flats)
  • Special flange mounting configurations available.
  • Special gear and mounting frame configurations available.
 Hall Effect Precision Position Sensor

Hall Effect Series

Part Number Output Temperature
1/2" [12.7mm] Size 5 Diameter
1/2quot; [12.7mm] Size 5 Diameter Click here to view diagram.
H005-1000-030 (A) Analog -40° to 125°C
H005-1000-03T (A) Analog -40° to 150°C
H005-1000-130 (A) Serial -40° to 125°C
H005-1000-13T (A) Serial -40° to 150°C
H005-1000-230 (A) PWM* -40° to 125°C
H005-1000-23T (A) PWM* -40° to 150°C
H005-1001-030 (C) Analog -40° to 125°C
H005-1001-130 (C) Serial -40° to 125°C
H005-1001-230 (C) PWM* -40° to 125°C
7/8" [22.23mm] Size 9 Diameter Single Output
7/8" [22.23mm] Size 9 Diameter Single Output Diagram Click here to view diagram.
H009-1000-030 (A) Analog -40° to 125°C
H009-1000-03T (A) Analog -40° to 150°C
H009-1000-130 (A) Serial -40° to 125°C
H009-1000-13T (A) Serial -40° to 150°C
H009-1000-230 (A) PWM* -40° to 125°C
H009-1000-23T (A) PWM* -40° to 150°C
H009-1001-030 (C) Analog -40° to 125°C
H009-1001-130 (C) Serial -40° to 125°C
H009-1001-230 (C) PWM* -40° to 125°C
7/8" [22.23mm] Size 9 Diameter Dual Output
7/8" [22.23mm] Size 9 Diameter Dual Output Diagram Click here to view diagram.
H009-1200-030 (A) Analog -40° to 125°C
H009-1200-03T (A) Analog -40° to 150°C
H009-1200-130 (A) Serial -40° to 125°C
H009-1200-13T (A) Serial -40° to 150°C
H009-1200-230 (A) PWM* -40° to 125°C
H009-1200-23T (A) PWM* -40° to 150°C
H009-1201-030 (C) Analog -40° to 125°C
H009-1201-130 (C) Serial -40° to 125°C
H009-1201-230 (C) PWM* -40° to 125°C

Notes: * Pulse-width modulation
(A) Aerospace - Qualified to RTCA/DO-160F
(C) Commercial - Shaft un-sealed

Page Navigation (Scrolls down the page)

Hall Effect Series Hall Effect Characteristics Custom Options

Find a Product

View Custom Capabilities

Contact Us

Request RFQ Locate a Sales Rep

Hall Effect Characteristics Go to top of page
Electrical Characteristics
Electrical Angle 1°-359°/Dead Zone: 1°-359°
Increasing Function Either CW or CCW
Linearity (Single Output) ±0.1% Absolute at 25°C
±0.3% Over full temperature range (Temperature customization available)
Linearity (Dual Output) ±0.2% Absolute at 25°C
±0.4% Over full temperature range (Temperature customization available)
Tracking (Dual Output) ±0.3%
Power Rating @ 25°C 0.080 Watt Max.
Resolution 12 Bit
Sampling Rate 600μs Standard or 200μs
Digital High Speed Available
Nominal Supply Voltage (Vdd) 4.5 - 5.5 V
Nominal Supply Current (Idd) 8.5 mA to 11 mA Standard,
13.5 mA to 16 mA Digital
High Speed
Output Options:
Analog - Ratiometric Rail to Rail
Digital - PWM 500 Hz (100-1,000 Hz Available)
Digital - Serial 3 Wire Protocol (14 bit resolution)
Absolute Maximum Ratings:
Reverse Voltage Protection: -10V
Maximum Supply Voltage (overvoltage) +20V
Positive Output Voltage +10V
Output Current (lout) ±30 mA
Reverse Output Voltage -0.3V
Reverse Output Current -50 mA
Enviromental Characteristics
Rotational Life > 100 Million Revolutions (Standard bearing life - Custom Available)
Electrical Life > 2,500 Hours @ 150°C
Storage Temperature -40°C to +150°C*
Operating Temperature -40°C to +125°C (150°C opt.)*
Mechanical Shock Sawtooth 20G Peak
Electrostatic Discharge 15kV (Human Body Model)
Vibration High Frequency, Swept 3 to 2,000 Hz, 30G Peak
Magnetic Field Emission At 30 CM, Less than 1° Effect on Compass
EMI Immunity 120 A-m Magnetic Field and 5,400 V-m Electric Field
RF Emissions Zero Emission, Swept 0.15 MHz to 6,000 MHz

* Exposure to maximum rated conditions for extended periods may affect device reliability.
Mechanical Characteristics
Rotation Continuous 360°
Axial Play < 0.001" [0.025 mm]
Torque - Starting/Running:
Aerospace - Sealed < 2.0 Oz.-In.
Commercial - Un-sealed < 0.05 Oz.-In.
Materials of Construction
Housing Anodized Aluminum
Shaft Passivated Centerless Ground Stainless Steel
Bearings Precision Miniature Ball
Lead Wires Teflon Type ET (Optional AWG, Lead Lengths & Terminations)
Printed Circuit
Board		 HR370 High TG
(FR-5 Available)
Terminals/Connectors Available JST, Molex

Custom OptionsGo to Top of Page

Mounting Special Pilots & Shrouds Special Pilots & Shrouds Flanges & Mounting Holes Flanges & Mounting Holes Threaded Face Threaded Face
Shaft Special Pilots & Shrouds Flats Flanges & Mounting Holes Thru Holes Threaded Face Knurled/Spline
Special Pilots & Shrouds Split Shaft with Index Flanges & Mounting Holes Cross Pin Threaded Face Special Diameter/Custom Lengths
Connectors
&
Terminations		 Custom Termination Options Custom Termination Options
Potted Lead Exits - Wire type, color, gauge - Custom exit locations
Terminal Special Pilots & Shrouds Radial Turret Flanges & Mounting Holes Rear Terminal Threaded Face Special Locations Threaded Face Plated Solder Lugs
Custom High Strain Relief Options High Strain Relief Design High Strain Relief Design
High Strain Relief Designs
  • Special Functions
  • Custom Electrical Angles
  • Log Taper
  • Mechanical/Electrical Index or Phasing
  • Multiple Turns and Counters
  • Dual Resolution Output
Go to Top of Page